Connect encoders in Vitruve Teams

Connect one encoderCopy Anchor Link

1. Switch the encoder on and make sure it is in Bluetooth (BT) mode.
2. Open Vitruve Teams.
3. In the upper right corner, a V icon with a red dot means no encoder is connected. Tap it.
4. Your powered-on encoder in BT mode appears on the screen. Tap it to connect.

Success check: a small green dot appears next to the V icon, and the encoder light turns green.

Connect two or three encoders to one iPadCopy Anchor Link

Vitruve Teams can connect up to 3 encoders at the same time per tablet. Multi-connection works only on iPad.

1. Switch on all encoders and confirm each one is in Bluetooth mode.
2. Open the app.
3. Tap the V icon with the red dot in the upper right corner.
4. Select Allow Multi-Connection.
5. All powered-on encoders in BT mode appear on the screen. Tap each one you want to use. You can pair 2 or 3 encoders.
6. Close the Encoders Available screen and turn the iPad to landscape.

Success check: the training screen splits into two or three sections, one per encoder.

If an encoder does not appearCopy Anchor Link

Check that the encoder is switched on and in Bluetooth mode, then reopen the V screen. For encoder buttons, lights, and hardware problems, see Encoder troubleshooting.